This 1.8" Schedule 40 seamless pipe, crafted from premium 304 stainless steel, offers superior corrosion resistance and structural integrity for demanding industrial use.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 1.8" |
| Outside Diameter | 6.443" |
| Wall Thickness | 0.405" |
Built to exacting engineering tolerances, this 1.8" Schedule 40 seamless pipe boasts an outside diameter of 6.443" and a wall thickness of 0.405". Fabricated from 304 stainless steel, it provides excellent resistance to a wide range of corrosive media, including acids, alkalis, and chlorides, making it suitable for high-pressure, high-temperature environments. Its seamless construction ensures uniform strength and leak-proof performance, crucial for critical fluid and gas transfer systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper alignment and support of the pipe sections. 2. Utilize appropriate welding procedures for 304 stainless steel, ensuring full penetration and a clean, slag-free weld. 3. Perform hydrostatic or pneumatic testing as per project specifications to verify system integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible welding consumables for 304 stainless steel. | Always use welding consumables specifically designed for 304 stainless steel to maintain corrosion resistance and mechanical properties. |
| Insufficient pipe support leading to stress concentration. | Install adequate pipe supports at recommended intervals to prevent excessive sagging and stress on joints. |
A: This Seamless Pipe, Schedule 40 is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Food and beverage processing, High-pressure fluid transfer systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||