This 1.8-inch Schedule 40 seamless brass pipe offers superior corrosion resistance and durability. Its precise dimensions ensure reliable performance in demanding fluid handling applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.8" |
| Outside Diameter | 1.855" |
| Wall Thickness | 0.120" |
Engineered for reliability and performance, this 1.8-inch Schedule 40 seamless pipe boasts an outside diameter of 1.855 inches and a wall thickness of 0.120 inches. Manufactured from high-quality brass, it exhibits excellent resistance to corrosion and dezincification, making it ideal for a wide range of fluid conveyance systems. The seamless construction eliminates weld seams, enhancing its structural integrity and minimizing leak potential under pressure. Its robust material properties ensure longevity in applications involving water, oil, and certain chemical solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate pipe sealant or PTFE tape to the male threads. 3. Carefully thread the pipe into the fitting, hand-tightening initially. 4. Use a pipe wrench to achieve a secure, leak-proof connection, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe sealant or tape for brass fittings. | Always use thread sealants specifically rated for brass or compatible with the conveyed fluid to prevent corrosion or galling. |
| Over-tightening the pipe, leading to thread damage or deformation. | Tighten securely until a leak-proof seal is achieved, but avoid excessive force that could damage the brass threads or the fitting. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Plumbing and water distribution systems, Industrial fluid transfer lines, Decorative and architectural accents.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||