Engineered for robust power transmission, this brass deep groove ball bearing offers superior corrosion resistance and reliable performance in demanding environments. Its precise dimensions ensure seamless integration and reduced operational friction.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 17mm |
| Outside Diameter | 69mm |
| Width | 39mm |
Manufactured under strict quality controls, this deep groove ball bearing features an internal diameter of 17mm, an external diameter of 69mm, and a width of 39mm. Constructed from high-quality brass, it exhibits excellent machinability, good thermal conductivity, and inherent corrosion resistance, making it ideal for applications exposed to moisture or specific chemical environments. The symmetric design of deep groove ball bearings allows them to accommodate radial loads in both directions, as well as axial loads. This bearing's material properties contribute to a quieter operation and extended service life in moderate load and speed conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Secure the bearing in the housing, applying even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Use a bearing press or appropriate sleeve to apply force evenly to the correct ring (inner for shaft mounting, outer for housing mounting). |
| Improper lubrication, either insufficient or using the wrong lubricant type. | Consult the bearing's datasheet or application requirements for the recommended lubricant and fill quantity. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Conveyor Systems, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||