This Aluminum 6061 deep groove ball bearing offers exceptional performance in power transmission systems. Its lightweight construction and precise dimensions ensure reliable, low-friction operation in a variety of industrial settings.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 17mm |
| Outside Diameter | 33mm |
| Width | 11mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 17mm, an outside diameter of 33mm, and a width of 11mm. Constructed from Aluminum 6061, it provides a superior strength-to-weight ratio, excellent corrosion resistance, and good thermal conductivity, making it ideal for applications where weight reduction and environmental factors are critical. The raceway design minimizes friction and vibration, ensuring smooth rotational performance under moderate radial and axial loads. This bearing is designed for extended service life in demanding operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the inner or outer ring respectively. 3. Verify free rotation of the bearing after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the bearing during installation, potentially deforming the raceways. | Use a proper bearing press or a controlled impact method, ensuring force is applied only to the ring being seated. |
| Improper lubrication, leading to premature wear and reduced bearing life. | Consult the lubrication guidelines for the specific application and ensure the correct type and amount of lubricant are used. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motor Shafts, Conveyor Systems, Robotic Arms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||