This Schedule 80 carbon steel seamless pipe offers superior strength and pressure handling capabilities. Its robust construction makes it ideal for high-stress fluid and gas transfer in critical industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 1.7" |
| Outside Diameter | 1.657" |
| Wall Thickness | 0.259" |
Manufactured under strict quality controls, this 1.7" nominal pipe size (NPS) seamless pipe features an outside diameter (OD) of 1.657" and a substantial wall thickness of 0.259". Engineered from high-grade carbon steel, it adheres to stringent industry standards for mechanical properties, ensuring excellent tensile strength, yield strength, and resistance to corrosion and abrasion. This robust specification makes it suitable for high-pressure hydraulic systems, steam lines, and demanding chemical processing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify pipe dimensions and material certification against project specifications. 2. Prepare pipe ends for welding or threading according to applicable codes (e.g., beveling for welding). 3. Install using appropriate joining methods (welding, threading, or flanging) and ensure proper alignment to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe schedule for the application's pressure rating. | Always consult pressure-temperature charts and engineering calculations to select the appropriate Schedule (e.g., Schedule 80 for higher pressures) based on the fluid, operating pressure, and temperature. |
| Inadequate post-weld heat treatment for carbon steel. | Implement appropriate post-weld heat treatment (PWHT) as required by code and application to relieve residual stresses and prevent embrittlement, especially in thicker wall sections. |
A: This Seamless Pipe, Schedule 80 is manufactured from Carbon Steel.
A: High-pressure hydraulic systems, Steam and condensate lines, Chemical and petrochemical processing, Oil and gas transportation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||