This 1.7" Schedule 160 brass seamless pipe offers exceptional strength and corrosion resistance. Its robust construction ensures reliable performance in high-pressure and demanding fluid handling applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.7" |
| Outside Diameter | 2.509" |
| Wall Thickness | 0.259" |
Engineered for reliability and performance, this brass seamless pipe features a 1.7" nominal size, a precise 2.509" outside diameter, and a substantial 0.259" wall thickness, classifying it under Schedule 160. The inherent properties of brass, including excellent corrosion resistance, good machinability, and non-sparking characteristics, make it suitable for a wide range of industrial and commercial applications. Its seamless construction eliminates weld seams, ensuring uniform strength and integrity under elevated pressures and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe support and alignment to prevent undue stress. 2. Use appropriate cutting and deburring tools to create clean, square ends. 3. Employ suitable joining methods (e.g., brazing, soldering, or threaded connections) compatible with brass and the operating environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect joining methods that compromise seal integrity. | Consult material compatibility charts and use methods specifically recommended for brass, ensuring proper flux and filler material selection. |
| Inadequate pipe support leading to sagging or stress concentrations. | Install supports at recommended intervals based on pipe diameter, length, and operating conditions to maintain structural integrity. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure fluid transfer systems, Instrumentation lines, Corrosive environment applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||