This deep groove ball bearing, crafted from robust carbon steel, is designed for exceptional load-carrying capacity and low friction. Its precise dimensions ensure seamless integration into power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 16mm |
| Outside Diameter | 178mm |
| Width | 15mm |
A high-performance industrial component, this deep groove ball bearing features an internal bore diameter of 16mm and an external diameter of 178mm, with a radial width of 15mm. Constructed from premium carbon steel, it offers superior hardness and wear resistance, crucial for demanding power transmission applications. The raceway geometry is optimized for axial and radial loads, ensuring extended service life and operational efficiency in high-speed environments. Its robust material composition makes it suitable for moderate shock loads and environments where high reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from contaminants. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling, applying even pressure. 3. Verify smooth rotation and check for any signs of binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, leading to brinelling or deformation. | Use a proper bearing installer or hydraulic press, ensuring force is applied to the correct ring (inner for shaft, outer for housing). |
| Improper lubrication leading to premature wear. | Apply the correct type and amount of lubricant as specified for the application and operating conditions before initial startup. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||