Engineered for demanding industrial environments, this 1.6-inch Schedule 80 seamless brass pipe offers superior corrosion resistance and mechanical strength for critical fluid transfer applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 1.6" |
| Outside Diameter | 1.173" |
| Wall Thickness | 0.195" |
A proven choice for industrial professionals, this 1.6" seamless brass pipe adheres to Schedule 80 dimensional standards, featuring an outside diameter of 1.173" and a robust 0.195" wall thickness. Crafted from high-grade brass, it exhibits excellent machinability and significant resistance to a wide array of corrosive media, making it suitable for applications involving water, oil, and certain chemical solutions where reliability is paramount. Its seamless construction ensures uniform wall thickness, minimizing the risk of leaks under elevated pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate pipe sealant or PTFE tape to the male threads of fittings. 3. Hand-tighten the pipe into the fitting, then use a wrench to achieve a snug, leak-proof connection, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong sealant for the fluid being conveyed. | Consult material compatibility charts to select a sealant or tape that is resistant to the specific fluid or gas. |
| Overtightening threaded connections, which can crack the brass fittings or damage the pipe threads. | Tighten connections until snug, then an additional 1/4 to 1/2 turn for most brass fittings. Avoid excessive force. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Hydraulic systems, Pneumatic lines, Corrosive fluid transfer, Instrumentation tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||