This high-performance Schedule 40 seamless pipe, crafted from robust polycarbonate, offers exceptional clarity, impact resistance, and chemical inertness for demanding industrial applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 1.6" |
| Outside Diameter | 2.681" |
| Wall Thickness | 0.253" |
Manufactured under strict quality controls, this 1.6" nominal size seamless polycarbonate pipe features an outside diameter of 2.681" and a substantial wall thickness of 0.253", meeting Schedule 40 specifications. Polycarbonate's inherent properties provide excellent transparency for visual monitoring of flow, superior impact strength to withstand mechanical stress, and good resistance to many common industrial chemicals and oils. Its thermal stability allows for operation within a broad temperature range, making it suitable for diverse environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement and primer for polycarbonate fittings (if used) according to manufacturer instructions. 3. Insert pipe firmly into fitting, twisting slightly to ensure full coverage, and hold in place until initial set.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible solvent cements or adhesives not rated for polycarbonate. | Always use solvent cements and primers specifically formulated for polycarbonate to ensure proper fusion and prevent material degradation. |
| Exposing the pipe to excessive UV radiation without protection in long-term outdoor applications. | Consider UV-resistant coatings or housings for extended outdoor use to prevent embrittlement and material degradation over time. |
A: This Seamless Pipe, Schedule 40 is manufactured from Polycarbonate.
A: Visual fluid transfer systems, Protective conduit for sensitive components, Laboratory equipment and manifold construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||