This deep groove ball bearing, constructed from high-grade nylon, offers exceptional performance in power transmission applications. Its robust design ensures smooth operation and longevity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 15mm |
| Outside Diameter | 117mm |
| Width | 43mm |
Manufactured under strict quality controls, this 15mm inner diameter, 117mm outer diameter, and 43mm width deep groove ball bearing utilizes advanced nylon composite materials. This material selection provides excellent chemical resistance, low friction, and superior electrical insulation properties, making it ideal for environments where traditional steel bearings might corrode or conduct electricity. The inherent lightweight nature of nylon also contributes to reduced inertial loads. Designed for optimal load distribution and minimal radial play, it ensures efficient power transfer in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly to remove any debris or contaminants. 2. Carefully press the bearing into the housing or onto the shaft using an appropriate bearing installer or press. 3. Ensure the bearing is seated squarely and flush within its designated mounting surface, avoiding any tilting or excessive force. 4. Verify smooth rotation by hand after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Utilize a proper bearing press or installer tool and apply force evenly to the outer ring of the bearing when mounting in a housing, or to the inner ring when mounting on a shaft. |
| Improper lubrication, either too much or too little, affecting bearing life and performance. | Consult the bearing manufacturer's specifications for recommended lubricant type and quantity. For nylon bearings, consider specific lubricants compatible with polymers to avoid degradation. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Electric motors, Material handling equipment, Textile machinery, Food processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||