This 1.5" Schedule 40 seamless carbon steel pipe offers superior strength and integrity for demanding industrial applications. Its robust construction ensures reliable performance in high-pressure and corrosive environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.5" |
| Outside Diameter | 3.706" |
| Wall Thickness | 0.496" |
Manufactured under strict quality controls, this seamless carbon steel pipe meets ASTM A53 Type E Grade B specifications, ensuring consistent material properties and dimensional accuracy. With a nominal pipe size of 1.5 inches, it boasts a precise outside diameter of 3.706 inches and a substantial wall thickness of 0.496 inches. The carbon steel composition provides excellent tensile strength and weldability, making it suitable for a wide range of fluid conveyance and structural support systems in oil and gas, chemical processing, and general manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect pipe ends for damage or debris. Clean thoroughly. 2. Position pipe sections for alignment, ensuring proper fit with fittings. 3. Weld joints according to recognized industry standards and applicable codes, utilizing appropriate filler material and pre/post-weld heat treatment if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of pipe ends before welding. | Thoroughly clean pipe ends with a wire brush and solvent to remove any mill scale, rust, or foreign matter that could compromise weld integrity. |
| Incorrect welding procedures or filler metal selection. | Adhere strictly to welding procedures outlined in applicable standards (e.g., AWS D1.1) and select filler metals compatible with the base material and service conditions. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid transport in chemical plants, Structural components in heavy machinery, Conduit for oil and gas pipelines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||