This 1.5" Schedule 40 seamless brass pipe offers superior corrosion resistance and durability for demanding fluid transfer systems. Engineered for reliability and precision, it's an ideal choice for various industrial and commercial applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 1.5" |
| Outside Diameter | 2.267" |
| Wall Thickness | 0.222" |
Built to exacting engineering tolerances, this 1.5" Schedule 40 seamless brass pipe features a precise outside diameter of 2.267" and a substantial wall thickness of 0.222". The inherent properties of brass, including its excellent corrosion resistance against a wide range of fluids and its machinability, make this pipe a superior choice for applications where longevity and material integrity are paramount. This specification ensures optimal flow characteristics and structural integrity under pressure, facilitating safe and efficient transport of various media. Common uses include water distribution, chemical processing, and pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of foreign matter. 2. Apply appropriate flux and solder to fittings and pipe ends. 3. Heat joint evenly and allow solder to flow completely around the joint.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect flux or solder type for brass. | Always use a flux specifically designed for brass and a lead-free solder suitable for potable water or the specific fluid being conveyed. |
| Overheating the pipe during soldering, leading to embrittlement. | Apply heat evenly and consistently, focusing on the fitting. Remove heat as soon as solder flows to prevent overheating. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Corrosive fluid transfer, High-pressure water systems, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||