This 1.5" Schedule 80 carbon steel seamless pipe offers exceptional strength and durability. Its robust construction ensures reliable performance in demanding industrial environments, guaranteeing efficient fluid and gas transfer.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 1.5" |
| Outside Diameter | 6.152" |
| Wall Thickness | 0.246" |
Specified by design engineers worldwide, this 1.5" Schedule 80 seamless carbon steel pipe boasts a precise 6.152" outside diameter and a substantial 0.246" wall thickness. Manufactured to exacting standards, its carbon steel composition provides excellent tensile strength and resistance to pressure and impact. This pipe is engineered for critical applications where structural integrity and leak-proof operation are paramount, ensuring safe and efficient conveyance of fluids and gases under elevated conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of debris, and properly beveled according to welding procedures. 2. Align pipe sections accurately, maintaining proper gap for root pass. 3. Perform welding using qualified procedures and certified welders, adhering to NDT requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for carbon steel. | Always use welding consumables (electrodes, wires) specifically rated for the grade of carbon steel being joined. |
| Inadequate pre-heating or post-weld heat treatment for thicker sections. | Consult applicable welding codes (e.g., ASME B31.3) for required pre-heat and PWHT based on material thickness and ambient temperature. |
A: This Seamless Pipe, Schedule 80 is manufactured from Carbon Steel.
A: High-pressure fluid transfer systems, Steam and hydraulic lines, Structural components in industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||