This 1.5" Schedule 40 seamless pipe, crafted from premium 304 stainless steel, offers superior corrosion resistance and structural integrity for demanding industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.5" |
| Outside Diameter | 2.713" |
| Wall Thickness | 0.129" |
Manufactured under strict quality controls, this 1.5" Schedule 40 seamless pipe boasts an outside diameter of 2.713" and a wall thickness of 0.129". Constructed from grade 304 stainless steel, it exhibits excellent resistance to a wide range of corrosive media, including atmospheric conditions, many organic and inorganic chemicals, and food processing environments. This material's inherent durability and non-reactive properties make it ideal for fluid transport, structural components, and process piping where hygiene and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe preparation, including deburring all edges. 2. Fit the pipe into the intended connection, ensuring correct alignment. 3. Secure the connection using appropriate welding or mechanical joining methods as per industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joining methods for 304 stainless steel. | Consult material compatibility charts and use welding consumables and procedures specifically recommended for 304 stainless steel. |
| Failure to adequately clean the pipe ends before joining. | Thoroughly degrease and remove any contaminants from pipe ends to ensure a strong and defect-free joint. |
A: This Seamless Pipe, Schedule 40 is manufactured from 304 Stainless Steel.
A: Chemical processing plants, Food and beverage industry pipelines, Pharmaceutical manufacturing, Marine and offshore applications, High-purity water systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||