This Deep Groove Ball Bearing, constructed from durable carbon steel, features a 14mm inner diameter, 130mm outer diameter, and 20mm width. It's designed for efficient load distribution in power transmission systems.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 14mm |
| Outside Diameter | 130mm |
| Width | 20mm |
Engineered for reliability and performance, this deep groove ball bearing boasts a 14mm bore diameter, 130mm outer diameter, and a 20mm width, enabling robust operation within power transmission systems. Constructed from high-grade carbon steel, it offers excellent hardness and wear resistance, crucial for withstanding radial and axial loads. Its symmetrical design allows for easy mounting and accommodates moderate speeds, making it suitable for a wide array of industrial machinery and equipment where continuous and reliable rotational movement is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bore are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling to avoid damaging the raceways. 3. Verify proper seating and rotational freedom before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or race damage. | Use a bearing press or induction heater for controlled, even force application. Avoid hammering directly on the bearing. |
| Incorrect lubrication, either insufficient or using the wrong type of lubricant. | Consult the bearing manufacturer's recommendations for the correct lubricant type and quantity based on operating speed and temperature. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Industrial Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||