This 1.4" Schedule 40 Nylon seamless pipe is engineered for demanding industrial applications requiring high strength, chemical resistance, and smooth internal flow. Its robust construction ensures reliable performance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.4" |
| Outside Diameter | 1.443" |
| Wall Thickness | 0.303" |
A high-performance industrial component, this 1.4" Schedule 40 Nylon seamless pipe boasts a precise 1.443" outside diameter and a substantial 0.303" wall thickness, adhering to stringent Schedule 40 dimensional standards. Constructed from high-grade Nylon, it exhibits exceptional tensile strength, superior abrasion resistance, and excellent compatibility with a wide range of chemicals and solvents. The seamless design eliminates potential leak points, making it ideal for pressurized systems and applications where fluid integrity is paramount, including hydraulic lines, pneumatic systems, and chemical conveyance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement and primer to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a slight twisting motion until it bottoms out. 4. Hold firmly for the recommended set time to ensure a strong bond.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper solvent cement for Nylon materials. | Always use a solvent cement specifically formulated for Nylon to ensure a chemical bond and prevent material degradation. |
| Insufficient curing time after assembly. | Allow the solvent cement to cure fully according to the manufacturer's instructions before subjecting the pipe to pressure or stress. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Chemical and fluid transfer lines, Instrumentation tubing, Conveyor systems, Low-pressure structural support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||