This 1.4" Schedule 40 seamless brass pipe offers superior corrosion resistance and durability for demanding industrial applications. Its precise dimensions ensure reliable performance in fluid transfer and structural uses.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.4" |
| Outside Diameter | 2.757" |
| Wall Thickness | 0.493" |
A high-performance industrial component, this seamless brass pipe is engineered to meet stringent operational requirements. With a nominal pipe size of 1.4 inches, it features a precise outside diameter of 2.757 inches and a substantial wall thickness of 0.493 inches, adhering to Schedule 40 standards. The inherent properties of brass, including excellent corrosion resistance to a wide range of fluids and a high degree of machinability, make it suitable for challenging environments where longevity and integrity are paramount. This configuration is optimized for applications requiring robust fluid containment and structural support.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to the male threads. 3. Carefully thread the pipe into the fitting, ensuring a straight start to avoid cross-threading. Tighten to a snug fit using approved wrenches.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper thread sealant for brass fittings. | Utilize thread sealants specifically rated for brass to prevent galvanic corrosion or material degradation. |
| Over-tightening connections, leading to deformation or cracking. | Tighten connections until snug, then an additional quarter to half turn, depending on the fitting type. Refer to fitting manufacturer's torque specifications if available. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Water distribution systems, Chemical processing lines, Instrumentation tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||