This 1.4" Schedule 40 seamless brass pipe offers superior corrosion resistance and durability. Its precise dimensions ensure reliable performance in demanding fluid transfer applications. Ideal for a wide range of industrial and commercial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 1.4" |
| Outside Diameter | 4.222" |
| Wall Thickness | 0.131" |
Trusted by engineers across multiple sectors, this 1.4" Schedule 40 seamless brass pipe features a precise 0.131" wall thickness and an outside diameter of 4.222". Fabricated from high-grade brass, it exhibits excellent tensile strength, inherent corrosion resistance to a variety of media, and good thermal conductivity. This makes it exceptionally suitable for potable water systems, gas lines, hydraulic systems, and general fluid conveyance where long-term reliability and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate pipe sealant or PTFE tape to the male threads of fittings. 3. Thread the pipe into the fitting, tightening firmly to create a secure seal, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper thread sealant or tape. | Always use a sealant or tape specifically rated for brass and the intended fluid/pressure application. |
| Overtightening connections, which can stress the brass. | Tighten connections until snug and a seal is achieved, then an additional 1/2 to 1 turn is typically sufficient for brass fittings. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable Water Distribution, Gas and Oil Lines, Hydraulic Systems, Industrial Fluid Conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||