This robust deep groove ball bearing, constructed from durable carbon steel, offers exceptional load-bearing capacity and smooth rotational performance for critical power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 12mm |
| Outside Diameter | 76mm |
| Width | 39mm |
Designed for demanding industrial environments, this 12mm inner diameter, 76mm outer diameter, and 39mm width deep groove ball bearing is manufactured from high-quality carbon steel. This material selection ensures superior hardness, wear resistance, and load-carrying capabilities essential for continuous operation under stress. Its raceway geometry is precisely engineered to accommodate both radial and axial loads, providing consistent and reliable performance in applications such as electric motors, pumps, gearboxes, and material handling equipment where precision and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing and housing thoroughly before installation. 2. Carefully press the bearing onto the shaft or into the housing, ensuring perpendicular alignment to avoid brinelling. 3. Apply appropriate lubrication according to manufacturer recommendations before final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or into the housing at an angle. | Use a proper bearing press or a controlled hydraulic press to ensure the bearing is seated squarely and without excessive force. |
| Insufficient or incorrect lubrication. | Consult the bearing manufacturer's specifications for the correct type and amount of lubricant, and ensure it's applied prior to full operational load. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Industrial Pumps, Gearboxes and Reducers, Material Handling Equipment, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||