This 1.2" Schedule 40 brass seamless pipe offers superior corrosion resistance and durability. Its precise dimensions ensure reliable performance in demanding fluid transfer and structural applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.2" |
| Outside Diameter | 2.581" |
| Wall Thickness | 0.131" |
Precision-manufactured to tight tolerances, this 1.2" Schedule 40 seamless brass pipe boasts an outside diameter of 2.581" and a wall thickness of 0.131". Composed of high-grade brass alloy, it exhibits excellent resistance to a wide range of corrosive media, including water, mild acids, and alkalis, making it ideal for plumbing, HVAC systems, and chemical processing. The seamless construction eliminates potential leak points common in welded pipes, ensuring system integrity and longevity under pressure. Its thermal conductivity also makes it suitable for heat exchange applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the pipe ends and the fitting thoroughly to remove any debris or contaminants. 2. Apply a thin, even layer of approved pipe sealant or PTFE tape to the male threads of the pipe. 3. Carefully thread the pipe into the fitting, ensuring a snug fit, and tighten to the manufacturer's specified torque to prevent over-tightening and potential damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible thread sealant for brass fittings. | Always use thread sealants specifically designed for brass or approved for use with potable water and the conveyed fluid. |
| Over-tightening the connection, which can strip threads or crack the fitting. | Tighten connections firmly until snug, then make an additional quarter to half turn as needed, or use a torque wrench if specifications are available. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable water distribution systems, Hydronic heating and cooling lines, Chemical and process fluid transport, Decorative and structural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||