This 1.2" Schedule 40 seamless aluminum pipe, crafted from high-strength 6061 alloy, is engineered for superior performance in critical structural and fluid handling systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.2" |
| Outside Diameter | 2.675" |
| Wall Thickness | 0.228" |
Purpose-built for heavy-duty applications, this seamless pipe boasts a nominal size of 1.2 inches, an outside diameter of 2.675 inches, and a substantial wall thickness of 0.228 inches, conforming to Schedule 40 dimensional standards. Manufactured from Aluminum Alloy 6061, it offers an excellent balance of strength, corrosion resistance, and weldability, making it suitable for demanding environments. Its seamless construction ensures uniform wall thickness and pressure containment integrity, crucial for hydraulic lines, structural components, and pressurized gas systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to the male threads. 3. Hand-tighten the fitting, then use a wrench to tighten an additional 1-2 turns (refer to fitting manufacturer's torque specifications if available).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible thread sealant for aluminum. | Utilize sealants specifically rated for use with aluminum to prevent galvanic corrosion. |
| Over-tightening fittings, leading to thread damage or pipe deformation. | Adhere to recommended torque specifications or use gentle, progressive tightening to avoid stressing the pipe and fitting. |
A: This Seamless Pipe, Schedule 40 is manufactured from Aluminum 6061.
A: Structural framing and supports, Hydraulic and pneumatic lines, Marine and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||