This 1.2" Schedule 40 seamless brass pipe offers superior corrosion resistance and excellent formability. Engineered for reliable fluid conveyance and demanding applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.2" |
| Outside Diameter | 5.058" |
| Wall Thickness | 0.398" |
Manufactured under strict quality controls, this 1.2" nominal pipe size brass seamless pipe features an actual outside diameter of 5.058" and a wall thickness of 0.398", conforming to Schedule 40 specifications. The brass alloy provides excellent machinability, high tensile strength, and inherent resistance to dezincification and general corrosion, making it ideal for potable water systems, hydraulic lines, and decorative applications where longevity and aesthetic appeal are paramount. Pressure ratings are dependent on temperature and fluid type.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate pipe sealant or PTFE tape to the external threads of the fitting. 3. Thread the fitting onto the pipe, tightening securely but avoiding over-tightening to prevent damage to the brass.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, which can strip threads or crack the brass. | Tighten fittings snugly, using appropriate tools and torque recommendations for brass components. |
| Not verifying compatibility of pipe sealant or tape with brass fittings. | Always use sealants and tapes specifically rated for brass or compatible with copper alloys. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable water distribution systems, Hydraulic and pneumatic lines, Heat exchangers and condensers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||