This high-quality, 1.1-inch Schedule 40 seamless brass pipe offers superior corrosion resistance and a smooth internal surface, ideal for demanding fluid conveyance systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 1.1" |
| Outside Diameter | 5.475" |
| Wall Thickness | 0.275" |
Trusted by engineers across multiple sectors, this seamless brass pipe meets rigorous industry standards for reliability and performance. Featuring a nominal pipe size of 1.1 inches, it boasts an outside diameter of 5.475 inches and a substantial wall thickness of 0.275 inches, ensuring robust structural integrity and high pressure handling capabilities. The inherent properties of brass, including excellent machinability and resistance to dezincification and pitting corrosion, make it an optimal choice for applications involving water, oil, and gas distribution, as well as general fluid transfer in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare pipe ends by deburring and cleaning thoroughly. 2. Apply appropriate flux and solder to fittings and pipe ends. 3. Assemble fittings, ensuring proper alignment, and heat evenly for solder flow.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solder or flux for brass. | Always use solder and flux specifically designed for brass to ensure a strong, leak-free joint. |
| Overheating the pipe during soldering. | Heat the joint evenly and avoid prolonged direct heat to prevent material degradation. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Plumbing and Water Distribution, Instrumentation Tubing, Oil and Gas Fluid Transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||