This polycarbonate deep groove ball bearing offers a lightweight, non-conductive, and corrosion-resistant solution for power transmission applications. Its precise dimensions ensure smooth operation under moderate radial and axial loads.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 100mm |
| Outside Diameter | 108mm |
| Width | 38mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 100mm, an outside diameter of 108mm, and a width of 38mm. Constructed from high-performance polycarbonate, it offers exceptional chemical resistance and a significantly lower weight compared to steel bearings, making it ideal for environments where corrosion is a concern or weight reduction is critical. The material's inherent non-conductive properties are advantageous in electrical isolation applications. Its design accommodates moderate radial and axial loads, ensuring reliable performance in conveyor systems, light machinery, and specialized equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully align the bearing with the shaft, applying even pressure to press it into place. 3. Mount the housing, ensuring the outer ring of the bearing is properly seated and secured.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, potentially damaging the polycarbonate cage or raceways. | Use a bearing press or a controlled, even force application. Avoid hammering the bearing into place. |
| Over-greasing or using incompatible lubricants that can degrade the polycarbonate material. | Consult the bearing manufacturer's specifications for recommended lubricants. Use only small amounts of appropriate grease. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Conveyor Systems, Light Machinery, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||