This 1" Schedule 40 seamless carbon steel pipe offers superior strength and reliability. Engineered for high-pressure applications, its robust construction ensures long-term performance in demanding environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 1.0" |
| Outside Diameter | 2.363" |
| Wall Thickness | 0.214" |
Manufactured under strict quality controls, this 1.0" nominal size seamless pipe boasts an outside diameter of 2.363" and a wall thickness of 0.214". Fabricated from high-grade carbon steel, it provides exceptional tensile strength and yield strength, making it suitable for conveying a wide range of fluids and gases under moderate to high pressures and temperatures. Its seamless construction eliminates weld seams, enhancing integrity and preventing potential leak points, crucial for critical infrastructure and industrial processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of burrs, and properly beveled if required for welding. 2. Align pipe sections accurately and engage for welding or threading according to applicable codes and standards. 3. Complete joining operation (e.g., welding, threading) utilizing appropriate procedures and materials, followed by necessary inspection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe schedule for the intended pressure rating. | Always verify the required Schedule based on the system's operating pressure and fluid type, referencing ASME B31.3 or equivalent standards. |
| Inadequate support leading to pipe sag and stress concentrations. | Install pipe supports at recommended intervals to maintain alignment and prevent excessive deflection, especially for long runs or in vibration-prone areas. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid conveyance, General industrial piping systems, Mechanical and structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||