This 1" Schedule 40 brass seamless pipe offers exceptional corrosion resistance and durability. Its robust construction ensures reliable performance in demanding fluid handling and mechanical applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 1.0" |
| Outside Diameter | 1.096" |
| Wall Thickness | 0.383" |
Specified by design engineers worldwide, this 1.0" nominal size seamless brass pipe conforms to rigorous industry standards, featuring an outside diameter of 1.096" and a substantial wall thickness of 0.383". Manufactured from high-quality brass alloys, it exhibits excellent machinability and inherent resistance to a wide range of corrosive media, making it ideal for plumbing, hydraulics, instrumentation, and decorative structural components where longevity and integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to male threads. 3. Hand-tighten the fitting, then use a wrench to tighten an additional 1-1.5 turns for a secure seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during fitting installation, leading to thread damage or pipe deformation. | Apply firm, but not excessive, torque. Refer to fitting manufacturer's torque specifications if available. |
| Failing to verify pipe and fitting compatibility (e.g., NPS, schedule, and material). | Always confirm that the pipe size, schedule, and material are compatible with the intended fittings and application requirements. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Water and Gas Distribution Systems, Hydraulic and Pneumatic Lines, Instrumentation Tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||