This 1" Schedule 40 seamless aluminum pipe, crafted from 6061 alloy, offers exceptional strength and corrosion resistance. Its precise dimensions ensure reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.0" |
| Outside Diameter | 5.965" |
| Wall Thickness | 0.309" |
Engineered for reliability and performance, this 1.0" nominal size seamless pipe is manufactured from Aluminum Alloy 6061, renowned for its excellent strength, weldability, and corrosion resistance. It features an actual outside diameter of 5.965 inches and a robust wall thickness of 0.309 inches, conforming to relevant industry standards for Schedule 40 pipe. This alloy's balanced properties make it ideal for applications requiring a high strength-to-weight ratio and resistance to environmental degradation, such as structural components, fluid conveyance systems, and heat exchangers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe preparation, including deburring cut ends and cleaning the exterior. 2. Apply appropriate joining method (e.g., welding, flanging) according to alloy specifications and service requirements. 3. Verify dimensional accuracy and structural integrity after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible welding consumables for 6061 aluminum. | Consult welding procedure specifications (WPS) and use recommended filler metals for 6061-T6 alloy to ensure joint strength and integrity. |
| Ignoring the material's sensitivity to certain corrosive environments. | Evaluate the operating environment and confirm Aluminum 6061's suitability; consider protective coatings if exposed to aggressive chemicals or saltwater. |
A: This Seamless Pipe, Schedule 40 is manufactured from Aluminum 6061.
A: Structural framing and supports, Fluid and gas transfer systems, Heat exchanger components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||