This 1" Schedule 80 seamless pipe, constructed from premium 304 stainless steel, offers superior corrosion resistance and high-pressure handling capabilities for demanding industrial applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.0" |
| Outside Diameter | 3.050" |
| Wall Thickness | 0.452" |
Engineered for reliability and performance, this 1" Schedule 80 seamless pipe boasts an outside diameter of 3.050 inches and a substantial wall thickness of 0.452 inches, ensuring exceptional structural integrity. Fabricated from 304 stainless steel, it provides excellent resistance to a wide range of corrosive media, including acids and chlorides, making it suitable for high-pressure fluid transfer, chemical processing, and demanding structural components where longevity and safety are paramount. Its seamless construction eliminates weak points, guaranteeing leak-free operation under extreme conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the pipe ends and mating fittings to remove any debris or contaminants. 2. Apply appropriate threading compound or sealant to the male threads of the fitting. 3. Hand-tighten the fitting onto the pipe, then use a pipe wrench to achieve a secure, leak-free connection, taking care not to overtighten.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of sealant for the specific fluid or gas being conveyed. | Consult the material compatibility chart for the fluid/gas and select a sealant specifically rated for that application and the 304 stainless steel. |
| Overtightening threaded connections, leading to pipe deformation or thread damage. | Hand-tighten the connection until snug, then use a pipe wrench for an additional 1/2 to 1 full turn, depending on the fitting type. Avoid excessive force. |
A: This Seamless Pipe, Schedule 80 is manufactured from 304 Stainless Steel.
A: Chemical Processing & Transfer, High-Pressure Fluid Systems, Marine & Offshore Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||