This robust 1" Nylon U-Bolt provides secure and corrosion-resistant support for 1" nominal pipe. Engineered for demanding industrial environments, its non-conductive properties ensure safety in specialized applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 3.94" |
| Inside Length ( B) | 5.74" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this Nylon U-Bolt is precisely manufactured to accommodate 1" nominal pipe. It features an inside width (A) of 3.94 inches and an inside length (B) of 5.74 inches, ensuring a snug fit. The U-bolt is equipped with a 1/2"-13 UNC thread size for secure fastening with standard nuts and washers. Constructed from high-grade nylon, it offers exceptional resistance to corrosion, chemicals, and UV degradation, making it ideal for environments where metal alternatives would fail or pose electrical hazards. Its non-conductive nature also contributes to safety in electrical installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" nominal pipe, ensuring it is centered. 2. Insert the threaded legs through the mounting surface or bracket. 3. Securely fasten the U-bolt using appropriate 1/2"-13 nuts and washers, tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon U-bolt, which can lead to deformation or cracking. | Tighten nuts until snug and the pipe is securely held, but avoid excessive force. Periodic re-tightening may be necessary as the material settles. |
| Using the wrong size U-bolt for the intended pipe diameter. | Always verify the nominal pipe size and compare it against the U-bolt's inside width (A) to ensure a proper fit. |
A: This Nylon U-Bolt, 1" Pipe is manufactured from Nylon.
A: Plumbing and piping systems in corrosive environments, Electrical conduit support where non-conductivity is critical, Marine and offshore applications due to salt water resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||