This robust 1" carbon steel U-bolt provides secure and reliable pipe support. Precisely manufactured to stringent standards, it ensures long-lasting performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 3.19" |
| Inside Length ( B) | 6.92" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this U-bolt is constructed from high-grade carbon steel, offering exceptional tensile strength and durability. The inside dimensions are precisely machined to 3.19 inches (A) width and 6.92 inches (B) length, ensuring a snug and secure fit for 1-inch nominal pipe. Featuring a 1/2"-13 UNC thread size, it is designed for use with standard nuts and washers (sold separately) for robust fastening. Its inherent resistance to corrosion makes it suitable for a wide range of applications where moisture or environmental factors are present.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it is centered on the mounting surface. 2. Thread the nuts onto the U-bolt legs, tightening them evenly. 3. Continue tightening until the pipe is firmly secured, but avoid overtightening which could deform the pipe.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong U-bolt size for the pipe diameter. | Always verify the nominal pipe size and match it to the U-bolt's inside dimensions for a secure fit. |
| Overtightening the U-bolt, causing pipe deformation or stress. | Tighten nuts gradually and evenly until snug. Use a torque wrench if precise load is required. |
A: This Carbon Steel U-Bolt, 1" Pipe is manufactured from Carbon Steel.
A: Plumbing and pipe support systems, Mechanical and HVAC installations, Structural framing and bracing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||