This robust 1.000" thick 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. Precisely cut to 43" x 44", it's engineered for critical applications within the electrical and lighting sectors.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 1.000" |
| Length | 43" |
| Width | 44" |
Specified by design engineers worldwide, this 1.000" thick 304 stainless steel stock sheet meets stringent material requirements for demanding environments. Its austenitic structure, confirmed by its 18/8 chromium-nickel composition, provides excellent formability, weldability, and superior resistance to a wide array of corrosive agents common in electrical and lighting infrastructure. The dimensions of 43" x 44" offer a substantial surface area for fabrication of enclosures, mounting brackets, and structural components where reliability and longevity are paramount. This material is inherently non-magnetic in its annealed state and maintains its integrity across a broad temperature spectrum.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and quality against project specifications. 2. Prepare cutting and forming equipment according to 304 stainless steel machining guidelines. 3. Securely install fabricated components, ensuring proper grounding and electrical isolation as per industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners that will corrode prematurely when in contact with 304 stainless steel. | Utilize 304 or 316 stainless steel fasteners to maintain galvanic compatibility and prevent galvanic corrosion. |
| Inadequate cleaning of the stainless steel surface post-fabrication, leaving behind contaminants that can initiate corrosion. | Thoroughly clean all surfaces using non-abrasive cleaning agents and rinse with deionized water, followed by a thorough drying. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical enclosure fabrication, Lighting fixture mounting hardware, Control panel substrates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||