This premium 0.997-inch thick Nylon stock sheet is engineered for the rigorous demands of pneumatic systems. Offering exceptional durability and wear resistance, it provides a robust foundation for critical components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.997" |
| Length | 25" |
| Width | 29" |
Engineered for reliability and performance, this 0.997" thick Nylon stock sheet boasts a generous 25" x 29" dimension, providing ample material for custom fabrication in pneumatic systems. Nylon's inherent properties, including excellent tensile strength, high abrasion resistance, and low coefficient of friction, make it ideal for seals, bearings, and structural components that experience continuous cycling and high loads. Its machinability ensures precise fitting and consistent performance, contributing to extended equipment lifespan and reduced maintenance cycles in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and free of debris. 2. Precisely machine the Nylon stock sheet to the required dimensions using appropriate tooling for Nylon. 3. Deburr all cut edges to prevent premature wear or damage to mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not optimized for plastics. | Employ specialized router bits or saw blades designed for optimal cutting of Nylon to prevent melting or chipping. |
| Overheating the material during machining. | Maintain appropriate cutting speeds and feed rates, utilizing coolant if necessary, to prevent thermal degradation of the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components, Seals and gaskets, Wear pads and bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||