Engineered for demanding suspending and bracing applications, this 0.996" thick polycarbonate sheet offers exceptional strength, impact resistance, and optical clarity for robust structural support.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.996" |
| Length | 28" |
| Width | 37" |
Precision-manufactured to tight tolerances, this 0.996" thick polycarbonate stock sheet measures 28" in length and 37" in width. Composed of virgin polycarbonate resin, it exhibits superior impact strength (up to 250 times that of glass), excellent UV resistance, and a wide operating temperature range. Its inherent rigidity and dimensional stability make it ideal for load-bearing bracing components, structural supports, and protective enclosures where transparency and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean, dry, and structurally sound. 2. Precisely mark and drill holes for fasteners, considering material expansion/contraction. 3. Secure the polycarbonate sheet using appropriate hardware, avoiding over-tightening to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge of the sheet. | Maintain a minimum edge distance of at least 2 times the hole diameter to prevent cracking. |
| Using standard fasteners without proper washers. | Employ large-diameter washers to distribute load and prevent fastener pull-through. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Structural bracing for overhead systems, Support panels for industrial equipment, Protective guards and enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||