This robust carbon steel stock sheet provides a durable foundation for pneumatic system components. Its precise dimensions and material strength ensure reliable performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.996" |
| Length | 13" |
| Width | 13" |
Built to exacting engineering tolerances, this 0.996-inch thick carbon steel sheet offers superior structural integrity for pneumatic applications. The material's inherent strength and resistance to deformation make it ideal for fabricating robust enclosures, mounting plates, and structural supports within pneumatic systems. Its precise 13" x 13" dimensions facilitate streamlined integration and assembly in both custom and standard pneumatic setups, ensuring consistent fit and function.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and flatness against project requirements. 2. Prepare mounting surfaces or fabrication points according to design specifications. 3. Securely fasten the carbon steel sheet using appropriate hardware and techniques for pneumatic system integration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to corrosion. | Thoroughly clean and degrease the carbon steel surface before installation, and apply a suitable protective coating if environmental conditions warrant. |
| Over-tightening fasteners causing material deformation. | Utilize torque-limiting tools and follow recommended fastener torque specifications to prevent stress concentrations and maintain material integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic control panel fabrication, Mounting brackets for pneumatic actuators, Structural support for pneumatic manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||