Engineered for critical load-bearing applications, this substantial 0.995" thick carbon steel stock sheet provides exceptional strength and rigidity for robust suspending and bracing solutions. Its generous 17" x 16" dimensions offer ample material for custom fabrication.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.995" |
| Length | 17" |
| Width | 16" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.995 inches and dimensions of 17 inches by 16 inches. The high-carbon content ensures excellent tensile strength and yield point, making it ideal for resisting deformation under significant static and dynamic loads. Its inherent toughness allows for reliable performance in demanding environments where structural integrity is paramount for suspending heavy equipment or providing critical bracing support. Surface finish is optimized for welding and subsequent protective coatings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark cut lines on the carbon steel stock sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., plasma cutter, abrasive saw) to achieve clean, accurate edges. 3. Securely fasten the cut material using certified welding procedures or high-strength mechanical fasteners as dictated by the application's engineering."
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or inadequate weld penetration for the load requirements. | Always consult load charts and engineering specifications to select fasteners with sufficient shear and tensile strength, and ensure all welds achieve full penetration and meet relevant industry codes. |
| Failing to properly prepare surfaces for welding, leading to weak or brittle joints. | Thoroughly clean the steel surfaces to remove rust, mill scale, paint, and any contaminants before welding. Bevel edges as necessary for optimal weld fusion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty structural bracing for industrial equipment, Support structures for overhead piping and conduit systems, Custom fabrication of load-bearing components in manufacturing plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||