This 0.995" thick carbon steel stock sheet, measuring 18" x 26", is engineered for the rigorous demands of pneumatic applications. Its substantial thickness and carbon steel composition ensure superior durability and structural integrity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.995" |
| Length | 18" |
| Width | 26" |
Built to exacting engineering tolerances, this carbon steel stock sheet boasts a nominal thickness of 0.995 inches, with precise length and width dimensions of 18 inches and 26 inches, respectively. The inherent tensile strength and rigidity of carbon steel make it ideal for fabricating robust pneumatic enclosures, structural supports, and high-pressure component housings. Its material composition offers excellent machinability and weldability, allowing for custom fabrication and seamless integration into complex pneumatic systems. The dense grain structure resists deformation under significant load, ensuring long-term performance in industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Precisely cut to required dimensions using appropriate machining techniques (e.g., plasma cutting, waterjet). 3. Prepare edges for welding or fastening, ensuring clean and deburred surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material deformation or HAZ. | Utilize high-quality, sharp cutting tools and appropriate cutting speeds for carbon steel to maintain material integrity. |
| Inadequate edge preparation for welding, resulting in porosity or weak joints. | Ensure all welding edges are thoroughly cleaned, free of mill scale, oil, and contaminants, and properly beveled if required by the weld procedure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic control panel fabrication, Structural components for air compressors, Custom enclosures for pneumatic actuators and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||