Engineered for demanding environments, this 0.994" thick brass stock sheet provides superior self-lubricating properties and corrosion resistance. Its robust construction ensures longevity in critical wear applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.994" |
| Length | 37" |
| Width | 42" |
Trusted by engineers across multiple sectors, this premium brass stock sheet boasts a precise thickness of 0.994 inches, a generous length of 37 inches, and a width of 42 inches. Fabricated from high-grade brass, it exhibits excellent machinability, inherent self-lubricating characteristics crucial for reducing friction and wear in moving parts, and superior resistance to corrosive environments. These properties make it an ideal material for bearings, bushings, sliding components, and other applications where reliable low-friction performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area for installation is clean, dry, and free from contaminants. 2. Carefully cut the brass stock sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the fabricated component using approved mechanical fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for brass, leading to poor edge quality and potential material deformation. | Employ sharp, high-speed steel or carbide cutting tools specifically designed for non-ferrous metals like brass. Ensure proper coolant application to prevent overheating and improve cut quality. |
| Over-tightening fasteners, which can cause galling or deformation of the softer brass material. | Utilize torque wrenches to apply fasteners within the recommended torque specifications for brass to prevent stress concentration and material damage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||