This robust 0.992-inch thick carbon steel stock sheet, measuring 21 inches by 34 inches, offers exceptional strength and durability for demanding material handling and fabrication tasks. A reliable choice for industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.992" |
| Length | 21" |
| Width | 34" |
A proven choice for industrial professionals, this carbon steel stock sheet boasts a substantial 0.992" thickness, providing superior structural integrity and load-bearing capacity. Measuring 21" in length and 34" in width, its dimensions are optimized for a wide range of material handling applications, including custom fabrication of hoppers, chutes, and structural components. The inherent strength and formability of carbon steel make it ideal for environments requiring robust, long-lasting solutions. This material is engineered to withstand significant stress and impact, ensuring reliable performance in rigorous industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and quality upon receipt. 2. Prepare surfaces for cutting, bending, or welding according to project specifications. 3. Securely fasten or integrate the sheet into the intended material handling system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or thinner material for heavy-duty applications. | Always select material thickness appropriate for the expected load and impact forces, referencing engineering load charts if necessary. |
| Improper edge preparation leading to stress risers during fabrication. | Ensure all edges are deburred and properly prepared according to welding or joining standards to prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom chute and hopper fabrication, Heavy-duty shelving and work surfaces, Wear plates and impact liners for equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||