This robust Nylon stock sheet, precisely manufactured to 0.991" thickness, 30" length, and 33" width, offers exceptional durability and performance for demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.991" |
| Length | 30" |
| Width | 33" |
Purpose-built for heavy-duty applications, this Nylon stock sheet exhibits superior mechanical properties. With a thickness of 0.991 inches, a length of 30 inches, and a width of 33 inches, it provides ample material for custom fabrication. Nylon's inherent characteristics, including excellent wear resistance, high tensile strength, and good impact absorption, make it ideal for components subjected to significant stress and abrasion. Its machinability allows for the creation of precise, complex parts for various industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure cutting tools are sharp and appropriate for polymer machining. 2. Precisely measure and mark desired dimensions on the nylon sheet. 3. Utilize a suitable saw (e.g., band saw, circular saw with fine-tooth blade) for clean cuts, maintaining consistent feed rates.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect saw blades leading to melting or chipping. | Employ sharp, specialized blades designed for plastics and maintain optimal cutting speeds. |
| Overheating the material during cutting, causing deformation. | Use a lubricant or coolant and ensure adequate chip evacuation to manage heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and bushings, Machined gears and sprockets, Protective components for machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||