This high-grade brass stock sheet, specifically formulated for lubricating applications, offers exceptional wear resistance and low friction. Its precise dimensions ensure seamless integration into various industrial components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.987" |
| Length | 41" |
| Width | 33" |
Manufactured under strict quality controls, this brass stock sheet features a nominal thickness of 0.987 inches, a length of 41 inches, and a width of 33 inches. Engineered from a specialized brass alloy optimized for reduced friction and enhanced lubricity, it exhibits superior machinability and excellent resistance to galling and seizure. The material's inherent properties make it ideal for dynamic components requiring self-lubricating characteristics or as a bearing surface in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the receiving surface is clean, dry, and free from debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate machining tools. 3. Securely fasten the cut sheet to the intended component, ensuring flush fitment and proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to burrs or uneven edges. | Utilize sharp, high-quality cutting tools and maintain consistent feed rates to achieve clean, precise cuts. |
| Failure to degrease the brass surface before installation. | Thoroughly clean and degrease the brass stock sheet to remove any manufacturing residues that could impede lubrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in machinery, Bushings and wear pads, Low-friction sliding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||