Engineered for superior impact resistance and optical clarity, this 0.986" thick polycarbonate sheet offers exceptional performance for demanding safety applications. Available in a 48" x 35" size, it meets stringent industrial standards.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.986" |
| Length | 48" |
| Width | 35" |
Trusted by engineers across multiple sectors, this 0.986" thick polycarbonate stock sheet, measuring 48" in length and 35" in width, is manufactured from high-performance polycarbonate resin. This material offers an industry-leading impact strength, approximately 250 times that of glass, while maintaining excellent optical clarity. Its inherent UV resistance and wide operating temperature range make it ideal for both indoor and outdoor safety guarding, machine enclosures, and protective shields. The sheet's rigidity at this thickness provides substantial structural integrity for critical safety installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled mounting holes if applicable. 3. Secure the sheet using appropriate fasteners, ensuring even pressure to avoid stress concentrations. Consider using gasketed screws for enhanced sealing and vibration dampening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to surface cracking or stress fractures. | Use hand-tightening for fasteners and employ a torque wrench set to the manufacturer's recommended specification, if available. Ensure washers are used to distribute load. |
| Using abrasive cleaning agents or solvents that can damage the polycarbonate surface and reduce clarity. | Clean the polycarbonate with a mild soap and water solution, followed by rinsing with clean water and drying with a soft, lint-free cloth. Avoid ammonia-based cleaners. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Safety Shields and Barriers, Impact-Resistant Glazing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||