This robust carbon steel stock sheet is engineered for demanding pneumatic applications. Its substantial thickness and material strength ensure exceptional performance and longevity in high-stress environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.986" |
| Length | 34" |
| Width | 12" |
Purpose-built for heavy-duty applications, this 0.986-inch thick carbon steel stock sheet offers superior structural integrity for pneumatic system components. Measuring 34 inches in length and 12 inches in width, it provides ample material for fabricating robust housings, structural supports, and pressure-bearing elements. The inherent strength of carbon steel resists deformation under significant pneumatic pressure and mechanical stress, making it ideal for industrial machinery, hydraulic systems integration, and high-cycle pneumatic actuation where reliability is paramount. Its precise dimensions allow for accurate machining and integration into complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensional accuracy against design specifications. 2. Prepare surfaces for welding or mechanical fastening, ensuring cleanliness. 3. Fabricate and integrate into pneumatic system framework according to engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge steel for high-pressure pneumatic components. | Always specify and use materials with adequate thickness, like this 0.986" carbon steel, to withstand rated operating pressures and prevent catastrophic failure. |
| Inadequate surface preparation before welding or assembly. | Thoroughly clean all surfaces of oil, grease, and mill scale to ensure strong, defect-free welds and secure mechanical connections. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Cylinder Mounts, Heavy-Duty Pneumatic Actuator Housings, Industrial Air Compressor Frames.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||