This premium carbon steel stock sheet is engineered for extreme conditions within lubricating systems. Its substantial dimensions and material composition ensure exceptional performance in high-stress environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.983" |
| Length | 19" |
| Width | 34" |
Purpose-built for heavy-duty applications, this lubricating grade carbon steel stock sheet offers superior strength and wear resistance. Measuring precisely 0.983 inches thick, 19 inches in length, and 34 inches in width, it is forged from a high-carbon alloy optimized for reduced friction and extended component life in demanding mechanical systems. Its dense microstructure minimizes porosity, preventing lubricant seepage and ensuring consistent operational efficiency under significant load and thermal cycling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating surfaces to remove all debris and residual lubricants. 2. Position the carbon steel sheet accurately within the designated assembly area. 3. Secure the sheet using appropriate fastening methods as per the assembly design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Always ensure surfaces are meticulously cleaned and free of contaminants before installation. |
| Over-tightening fasteners, causing material deformation. | Apply torque specifications as recommended in the equipment's service manual to prevent over-stressing the carbon steel. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty bearing surfaces, Sliding components in machinery, Wear plates in lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||