This robust Nylon stock sheet, measuring 0.979" thick, 16" x 35", offers superior dielectric strength and mechanical integrity, ideal for demanding electrical insulation and structural components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.979" |
| Length | 16" |
| Width | 35" |
Purpose-built for heavy-duty applications, this 0.979" thick Nylon stock sheet provides exceptional dielectric strength, excellent wear resistance, and good chemical inertness. Its generous 16" x 35" dimensions facilitate fabrication of large-scale components. Engineered for superior electrical insulation and mechanical support in harsh environments, it withstands significant thermal cycling and physical stress, making it suitable for a wide range of industrial electrical and mechanical applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of contaminants. 2. Accurately measure and cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using mechanical fasteners or appropriate industrial adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper blade lubrication, leading to melting or rough edges. | Employ sharp, high-speed cutting tools with adequate coolant or lubrication to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking of the Nylon. | Utilize washers to distribute pressure and tighten fasteners to a snug fit, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation barriers, High-voltage component housings, Mechanical wear plates in electrical equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||