High-grade carbon steel stock sheet, specifically formulated for lubricating applications. Its robust composition and precise dimensions ensure superior performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.977" |
| Length | 17" |
| Width | 37" |
Specified by design engineers worldwide, this carbon steel stock sheet offers exceptional wear resistance and a low coefficient of friction, crucial for lubricating applications. With a precise thickness of 0.977 inches and dimensions of 17 inches by 37 inches, it provides ample material for fabricating components requiring excellent sliding properties. The material's inherent strength and machinability allow for intricate designs and reliable operation in high-stress environments, ensuring extended service life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Fabricate to required dimensions using appropriate cutting and forming tools. 3. Apply specified lubricants before assembly and during operation as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel without considering lubricating properties. | Always select stock designated for lubricating applications to ensure proper friction and wear characteristics. |
| Improper surface preparation before lubrication. | Thoroughly clean the fabricated component to remove all contaminants that could hinder lubricant adhesion and performance. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Wear Strips and Guides, Bearing Surfaces, Sliding Mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||