This high-grade brass stock sheet, measuring 0.977 inches thick and 46x46 inches, is manufactured for demanding measuring and inspecting tasks. Its superior material properties ensure accuracy and longevity in critical applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.977" |
| Length | 46" |
| Width | 46" |
Built to exacting engineering tolerances, this brass stock sheet boasts a precise thickness of 0.977 inches, with dimensions of 46 inches by 46 inches. Composed of a high-purity brass alloy, it exhibits excellent machinability, non-magnetic properties, and superior resistance to corrosion and wear, making it ideal for manufacturing precision gauges, calibration standards, and critical components in metrology equipment where dimensional stability and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and level. 2. Carefully position the brass stock sheet as required for your application. 3. Secure the sheet using appropriate methods (e.g., clamps, fasteners) without inducing distortion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during cutting or shaping, leading to deformation. | Utilize sharp, appropriate cutting tools and apply controlled pressure to maintain dimensional integrity. |
| Improper cleaning leading to contamination that affects accuracy. | Thoroughly clean the brass surface with a non-abrasive solvent before and after use, especially for critical measurements. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision gauge manufacturing, Calibration standard development, Metrology equipment components, Specialized tooling substrates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||