This premium brass stock sheet provides a stable and reliable surface for critical measuring and inspecting tasks. Its substantial thickness ensures rigidity and accuracy, making it ideal for calibration and layout work in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.976" |
| Length | 34" |
| Width | 13" |
Built to exacting engineering tolerances, this brass stock sheet features precise dimensions of 0.976" thickness, 34" length, and 13" width. Composed of a high-quality brass alloy, it exhibits excellent corrosion resistance, low magnetic permeability, and superior machinability, making it an ideal substrate for high-precision calibration standards, metrology fixtures, and specialized inspection tooling where dimensional stability and non-sparking properties are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean, flat, and free of debris. 2. Position the brass stock sheet carefully to align with any pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure to avoid warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Warping the sheet during installation by overtightening fasteners in one area. | Distribute fastener pressure evenly across the sheet. Use washers to spread the load and consider a staggered tightening pattern. |
| Using abrasive cleaners that can scratch the precision surface. | Clean with a soft cloth and mild, non-abrasive cleaning solutions specifically designed for brass or metals. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision Calibration Standards, Metrology Fixtures and Jigs, Dimensional Inspection Layout Surfaces, Specialized Machining Templates, Non-Sparking Work Surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||