This high-performance brass stock sheet is specifically designed for lubricating applications. Its precise dimensions and inherent material properties ensure optimal friction reduction and extended component lifespan.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.976" |
| Length | 32" |
| Width | 26" |
Built to exacting engineering tolerances, this 0.976" thick brass stock sheet measures 32" in length and 26" in width. Composed of a precisely formulated alloy, it exhibits excellent machinability and superior self-lubricating characteristics, minimizing wear in sliding contact applications. The material's inherent properties, including good thermal conductivity and corrosion resistance, make it ideal for demanding environments where reduced friction is paramount to operational efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely install the fabricated component into its intended application, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a general-purpose brass alloy for lubricating applications. | Utilize this specific lubricating grade brass stock sheet engineered for low friction and wear resistance. |
| Improperly cleaning mating surfaces before installation. | Thoroughly clean all mating surfaces to remove debris and ensure optimal contact and lubrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings and sleeves, Wear plates and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||