This robust Nylon stock sheet offers exceptional durability and wear resistance. Engineered for rigorous industrial applications, it provides superior impact absorption and chemical inertness for long-lasting performance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.975" |
| Length | 46" |
| Width | 32" |
Designed for demanding industrial environments, this 0.975-inch thick Nylon stock sheet, measuring 46 inches by 32 inches, exhibits a remarkable combination of tensile strength, abrasion resistance, and low coefficient of friction. Its inherent toughness makes it suitable for heavy-duty applications where material integrity under stress is paramount. The Nylon's chemical inertness ensures resistance to a broad spectrum of oils, greases, and solvents, preventing degradation and maintaining structural integrity in corrosive atmospheres. This material is ideal for fabricating components subjected to continuous mechanical stress and abrasive wear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove all debris and contaminants. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the cut sheet using suitable industrial-grade fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for high-density polymers. | Utilize carbide-tipped blades or specialized polymer cutting saws for clean, precise cuts without delamination. |
| Over-tightening fasteners, leading to material deformation. | Employ washers and torque fasteners to recommended levels for Nylon, allowing for thermal expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Impact Plates and Bumpers, Gears and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||