This 0.974-inch thick carbon steel stock sheet, measuring 46 inches by 33 inches, provides robust material for demanding electrical and lighting applications requiring structural integrity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.974" |
| Length | 46" |
| Width | 33" |
Trusted by engineers across multiple sectors, this carbon steel stock sheet offers exceptional strength and durability. With a precise thickness of 0.974 inches and dimensions of 46 inches by 33 inches, it is manufactured from high-grade carbon steel, ensuring superior tensile strength and resistance to deformation. This makes it ideal for fabricating sturdy electrical enclosures, robust lighting fixtures, and critical structural components where reliability and load-bearing capacity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the cutting surface to prevent damage. 2. Precisely measure and mark cut lines using appropriate tools. 3. Execute cuts using industrial-grade cutting equipment, ensuring safety protocols are followed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge finishing after cutting. | Utilize deburring tools to smooth all cut edges, preventing potential hazards and ensuring proper fitment. |
| Using standard fasteners on high-strength steel without pre-drilling. | Pre-drill pilot holes with appropriate drill bits for carbon steel to avoid material stress and fastener damage. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Electrical Enclosure Fabrication, Industrial Lighting Fixture Bodies, Custom Structural Supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||